Most Common Car Warning Signs and How to Fix them?

Modern automobiles are equipped with various dashboard lights meant to warn drivers of potential issues and allow them to address them. Everything seems normal until a new dashboard indicator arises. Typically, the situation is not very difficult.

Car Recovery Service has provided you with some of the most effective automobile indications and their descriptions so that you can make prompt decisions. You can also Hire Car Repair Service for Inspection of your Car.

How Do You Examine Vehicle Warning Lights?

Typically, you notice a warning indicator when your vehicle has a problem. However, it is simple to test the appearance and functionality of all your lights. 

1. In order to start a car with a key start, you must first turn the key to the “on” position.
2. Just turn the key in the ignition and you’re good to go.
3. However, instead of turning the switch two clockwise turns to the start position, you turn it one clockwise turn to the ‘on’ position. After entering the “on” mode, most or all of the dashboard indicators will glow. 
4. Accessing this mode varies across vehicle models.

What Do the Yellow Indicators on Your Dashboard Mean?

1. The color standard for red and yellow signs is worldwide. 
2. Red flags indicate a potentially fatal automotive issue. do not drive in case of such an alarming symbol.
3. Signs in yellow indicate problems that demand quick action. You may mention such symptoms when your car requires service from your mechanic. Other colors, such as green and blue, describe the features of a vehicle.

What Will Happen if the Engine Temperature Warning Light Is Ignored?

If you fail to halt during engine overheating, the engine will begin banging, damaging the piston ring, piston, and head gasket. Due to extreme heat, the engine’s internal components will expand, resulting in metal-on-metal contact.

Extreme overheating results in thermal stress, cracking, and deformation.

How should the Lubricating Oil Pressure Warning Light be handled?

1. The most critical aspect of maintaining your car in excellent condition is checking the oil level.
2. When the Oil Pressure Light illuminates, the obvious first step is to check the engine’s oil level in both circumstances.
3. If the engine’s oil level is low, replenish it. In such a case, it is necessary to replace the vehicle’s oil, which is often referred to as spring cleaning.
4. However, each automobile and environment is unique. Additionally, one must consider the weather, driving frequency, and automobile miles.

What to Do When the Battery Charging Light Illuminates?

Automobiles nowadays have a 12-volt rechargeable battery. The battery is responsible for the vehicle’s ignition system, headlights, radio, etc. Once the light has been switched on, you must inspect the battery. Since the battery is the only power source for a vehicle, additional warning lights may not illuminate if the battery dies.

Do You Need to Care on Service Engine Light Comes On

• Check all fluids in the engine compartment, including oil, brake, gearbox, washer, etc.
• Additionally, ensure that all of the car’s lights are functioning correctly.
• If everything above seems to be in order, it is recommended that you verify when your automobile was last serviced. Determine the next service date.
• If necessary, take the vehicle in for its scheduled maintenance.

What to Do When the ABS Warning Light Illuminates?

As there are several causes for the ABS warning light to illuminate, the proper action will depend on the cause. 

1. The first step would be to discover the cause.
2. If the light illuminates every time the ignition is turned on and then shuts off after some time, this is known as Bulb Check, indicating that all the warning lights are functioning correctly. 
3. Therefore, it is recommended to get your automobile inspected by a specialist.
4. If the ignition does not turn on the lights, check the bulb. The defective Dashboard must be replaced immediately.

What should be done when the Fuel Indicator Warning Light appears?

The issue may not be an emergency when the light initially turns on. However, it is advisable to empty the filter as quickly as possible. If you wait too long, water will accumulate and cause harm to the system. Always accept professional help to save your precious time.

What to Do When the Seat Belt Reminder Light Illuminates?

Well. Buckling Seat Belts are the sole option in such a situation. Ignoring the notice will not damage driving ability but increases accident harm risk. It has been observed that most drivers and front-seat passengers merely tie their seat belts behind their backs and do not use them. By doing so, individuals just increase their likelihood of experiencing an accident.

What should be done when the Airbag Warning Light illuminates?

1. The Airbag Check light must be quickly inspected by a trained specialist.
2. The expert will manage the data contained in the ECU, where all data is saved.
3. In such a circumstance, you must likewise refrain from driving your vehicle. 

What to Do When the Warning Light/Indicator for the Fog Lamps Illuminates?

1. Fog conditions need the usage of fog lights to improve visibility. However, when the weather is clear, many motorists fail to deactivate the system.
2. Switching off the fog lights while not in use is recommended to prevent the bulb from burning out.
3. If the fog lights are on for no apparent reason, it is recommended to have them inspected by a professional. Due to their limited lifespan, it may be difficult to utilize them when essential.

How Should You Handle the Torque Vectoring Warning Light?

If you want to resolve the issue permanently by blinking the traction light or torque vectoring warning light, you should take your car to a specialist at a service centre. If the vehicle is not inspected, it may spin or slide out of control, resulting in an accident.

When the Windscreen Washer Water Warning Light Comes?

You may not always require windscreen washer fluid; however, they are occasionally absolutely required. Maintaining the tank filled and preventing it from drying out is essential.

You should not disregard the notice and fill your reservoir or, in other cases, get your sensors and Windscreen Repaired and inspected.

What should be done if the Power Steering Control Warning Light illuminates?

1. check the power steering as well as fuel level.
2. Using an OBD2 scanner, examine the power steering control unit to see whether the fuel is adequate.
3. The power steering warning light may also be caused by a malfunctioning steering wheel angle sensor or a damaged fuse.
4. If you drive your vehicle with the power steering warning light on, the power steering might sustain severe damage.

Read also: Tips to Avoid Breakdown While on Road Trip

Final Words

In this article, you will discover the most frequent automobile warning signals and how to remedy them so that you may return to your commute without worry. We hope that this post was useful! If you have any more questions or issues, please do not hesitate to contact us.