Adding window tint to your vehicle is a great idea. It gives you privacy, protects you from the sun’s rays, and keeps your car cooler. But once you get it, you need to take care of it. In this guide, we’ll show you how to do that. These tips will help you keep them looking good and working well.
10 Tips to Take Care of New Installed Window Tint
1. Allow Adequate Drying Time
Immediately after the installation of your new window tint, it’s crucial to be patient and allow it to dry properly. Your tint installer should provide specific guidelines, but typically, you’ll need to wait at least 2-3 days before rolling down the windows or cleaning them. During this time, your tint is still curing, and any premature contact can damage it.
2. Avoid Disturbing the Edges
During the first few days after getting your window tint, you should be very careful near the edges. The sticky stuff that holds the tint in place needs time to get really strong, so don’t push or try to lift it from the edges.
Sometimes, you might notice some small water bubbles or a bit of haziness on the tint while it’s drying, but don’t worry, these usually go away as the tint gets better.
3. Keep Windows Rolled Up
While it’s tempting to enjoy the fresh air, keeping your windows rolled up during the curing process is essential. This prevents any dirt, debris, or moisture from getting trapped between the tint and the window, which can cause issues later on.
4. Gentle Cleaning is Key
When you clean your tinted windows, remember to be gentle. Use a mild cleaner without ammonia and a soft cloth made of microfiber to clean them. Stay away from strong chemicals and rough stuff because they can make scratches or harm the tint. It’s best to avoid them completely.
5. Avoid Sharp Objects
It’s important to note that you should never use sharp or pointy things to take off stickers, decorations, or leftover stuff from your tinted windows. Instead, try using a plastic scraper or your fingernail if you can do it gently. This helps prevent scratches on the film.
6. Use Sunshades
A great way to make sure the strong sun doesn’t harm your window tint is to use sunshades or window visors. These things help stop the bright sunlight and make your car or room stay cooler, so the tint doesn’t get hurt from the heat.
7. Regularly Inspect for Issues
Get into the routine of checking your window tint often to see if it’s okay. If you spot any bubbles, it’s coming off, or the colors are changing, don’t wait. Fix it quickly. Doing this early can stop the issue from getting worse and make fixing it easier.
8. Addressing Bubbling or Peeling
If you notice bubbling or peeling in your window tint, don’t panic. Small bubbles can sometimes disappear on their own as the tint settles. However, if the issue persists, consult your tint installer for a professional assessment and potential repair.
9. Professional Assistance
For any significant issues or concerns with your window tint, it’s advisable to seek professional assistance. Tint specialists have the expertise and tools necessary to assess and address more complex problems.
10. Reapply UV Protection
As time goes by, the window tint’s ability to block UV rays might get weaker. To fix this, you can put a special UV shield on the inside of your windows. This extra layer can make your tint last much longer.
Final Words
If your window tint has been installed for an extended period, it’s advisable to arrange for a professional assessment. Contact our skilled auto tint specialists to assess its current state and provide recommendations for essential maintenance or potential reapplication to ensure it continues to deliver optimal performance.
Read Also: Effects of Extended Oil Change Intervals on Car’s Health
